Best Tonneau Cover for Mitsubishi Triton 2026

Choosing a tonneau cover for your Mitsubishi Triton starts with checking its series, cabin size and factory configuration. Whether you’re replacing an old cover or fitting one for the first time, these details help you select the correct product.

This guide explains what to check when choosing a soft tonneau cover for an MQ, MR or MV Triton, including cover styles, installation and everyday use.

Start with Your Triton’s Configuration

Before ordering, confirm the following details:

• Your Triton’s series: MQ, MR or MV.
• The year of manufacture.
• The cabin size, such as Single Cab, Club Cab or Double Cab.
• Whether your ute has a factory tub or an alloy or steel dropside tray.
• Its factory headboard, sports bars and tub liner configuration.

Use our vehicle finder to narrow down the available covers, then check the fitment details and options on the product page. If you’re unsure which configuration you have, contact our team before purchasing.

MQ and MR Triton Cover Fitment

The MQ and MR share the same tub design. For cover selection, the relevant difference is the factory headboard configuration. Their factory sports bars are the same across the two series.

Check the headboard and sports-bar options shown in the product listing rather than assuming that every MQ or MR uses the same cover configuration.

If you’re replacing a cover, don’t assume a new one will attach to the rails, hooks or fittings already installed. Our covers are supplied for their specified fitting system and are not generally designed to reuse hardware from another cover.

MV Triton Cover Fitment

The MV uses a different tub design from the MQ and MR. Select a cover listed for the MV and check that it suits your cabin size and factory configuration.

For a vehicle purchased around a model changeover, confirm the series rather than relying on its registration year alone.

Factory Tub or Dropside Tray?

A cover designed for a factory Triton tub is different from one designed for an alloy or steel dropside tray.

If your Triton has a dropside tray, browse our tray-cover range and check the required dimensions and fitting details. The vehicle model alone does not identify the correct cover for a separately fitted tray.

If you need help, send our team photos of the tray and its dimensions so we can advise which options may suit.

Choosing a Soft Cover Style

Our soft tonneau cover range for these three series is our Clip-On cover. Availability depends on your Triton and its configuration, so check the options listed for your vehicle.

Clip-On Covers

Clip-On covers attach using a rail-based fitting system for a neat finish around the tub. To access the tub, release the cover as directed in its instructions.

Clip-On covers are not designed to be rolled up. Follow the supplied handling and storage instructions when removing the cover.

Material and Weather Protection

Our soft tonneau covers use 700GSM PVC vinyl. The material is 100% waterproof and helps protect your tub’s contents from the weather.

However, the fitted cover is not completely watertight. Water can enter around sports-bar cut-outs, other openings and gaps, depending on your ute’s configuration and how the cover fits.

A cover can also help reduce direct exposure to sand and dirt during everyday use, but it does not create a dustproof seal.

Sports Bars, Headboards and Other Fittings

Our standard Triton covers are designed for the factory setups specified in each product listing. Select the correct options for your factory sports bars, headboard and tub liner where applicable.

These covers are not designed to accommodate aftermarket ladder racks, roof racks or other modifications. If your ute’s setup differs from the listed configuration, contact us before ordering.

What to Expect During Installation

Our covers come with the relevant fitting kit and instructions. Installation requirements vary by product, and drilling is required where specified in the fitting instructions. Our range should not be treated as a no-drill installation.

Read the instructions before starting, check the position of each fitting carefully and use the supplied components as directed. Installation time depends on the cover and your experience, so allow enough time to complete the work carefully.

If you would prefer help, fitting is available at our Bayswater factory for an additional cost. Contact our team to confirm pricing and availability.

Using Your Cover Over a Secured Load

A tonneau cover is not a load restraint. Tools, equipment and other items must be secured correctly using suitable tie-downs and anchor points before the cover is fitted.

The cover can then be placed over a suitable secured load and its tie-downs to help keep it dry. Do not force the cover over items that prevent it from fitting or fastening correctly.

Cleaning and Spare Parts

Follow the care instructions supplied with your cover. Remove loose sand and dirt before wiping the material to avoid rubbing grit across its surface.

Check the cover and its fittings periodically, and address worn or damaged components before continuing to use them.

We supply spare parts for our covers. If you’re unsure which component you need, contact our team with your cover details and a photo of the part.

Frequently Asked Questions

Do MQ and MR Tritons have different tubs?

The MQ and MR share the same tub design. The factory headboard configuration is the relevant distinction when selecting your cover. Check the options in the product listing before ordering.

Can I use an MQ or MR cover on an MV Triton?

The MV has a different tub design. Choose a cover specifically listed for the MV and your vehicle’s configuration.

Can I reuse the fittings from my old cover?

Do not assume your existing hardware is compatible. Our covers are designed for their specified fitting system. Check with our team before ordering if you intend to retain existing fittings.

Can I roll up a Clip-On cover?

No. Clip-On covers are not designed to roll up. Bunji and Stretch Rope covers can be rolled back when access is needed. Follow the handling instructions for your particular cover.

Is the cover completely waterproof?

The 700GSM PVC vinyl material is 100% waterproof. The fitted cover is not completely watertight because water can enter around cut-outs, openings and gaps.

Find a Cover for Your Mitsubishi Triton

Use our vehicle finder or browse our soft tonneau covers to find the options available for your Triton.

For help checking your series, factory configuration or fitting requirements, call (03) 9262 6999 or contact us before ordering.